When the corner installation must serve as a functional light source — not just ambient fill — this frosted V-shape kit delivers approximately 85% light transmission at an angle, making it effective for illuminating shelves, toe-kick areas, or display niches. The frosted diffuser still hides individual emitters while passing significantly more output than the opaline version. Full component details are listed below. Included: 1× V-shape aluminium profile (8 ft) 1× Frosted diffuser 4× Mounting brackets 1× Open end cap 1× Closed end cap Compatible LED Tape Lights: 3528 - 8 mm (5/16 in.) 5050 - 12 mm (1/2 in.) COB - 8 mm (5/16 in.) RGBW - 12 mm (1/2 in.)

This V-shape kit has everything needed for a finished corner LED tape run. The opaline diffuser delivers 55% transmission across the angled aperture, producing glare-free ambient light ideal for residential coves, shelving niches, or architectural detail work. All components are matched for compatibility; see the full list below. Included: 1× V-shape aluminium profile (8 ft) 1× Opaline diffuser 4× Mounting brackets 1× Open end cap 1× Closed end cap Compatible LED Tape Lights: 3528 - 8 mm (5/16 in.) 5050 - 12 mm (1/2 in.) COB - 8 mm (5/16 in.) RGBW - 12 mm (1/2 in.)

Engineered for corner-mounted and indirect lighting applications, this V-shape aluminium profile directs LED tape output at an angle rather than straight out — creating diffused ambient light along edges, coves, toe-kicks, or shelving where a square or recessed profile would not work. The 45-degree geometry makes it the standard choice for any transitional or in-corner lighting run. Profile body only; pair with Arani's V-shape diffuser, end caps, and mounting brackets for a complete installation. Compatible LED Tape Lights: 3528 - 8 mm (5/16 in.) 5050 - 12 mm (1/2 in.) COB - 8 mm (5/16 in.) RGBW - 12 mm (1/2 in.)

Sized for the V-shape aluminium profile, this open end cap clips onto the cable-entry end of the angled channel to provide a clean, finished wire exit while protecting the profile edge. For visible corner installations, an unfinished end cap side detracts from the finished look — this cap eliminates that issue. Pair with the V-shape closed end cap at the sealed end.

At the sealed end of a V-shape aluminium profile run, this closed end cap snaps onto the angled channel to protect the cavity and complete the visual termination. No adhesive or tools required. Use it at the non-wiring end of the profile; pair with the V-shape open end cap at the cable-entry side for a fully finished corner installation.

For a secure corner lighting installation, these brackets hold the V-shape aluminium profile firmly in its angled mounting position. Space one bracket every 2 feet with a minimum of two per profile length to prevent flex in the finished installation. Brackets are designed specifically for the V-shape profile geometry and will not correctly secure a square or recessed channel.